GHOST GEN5 V2 + Ghost Gen5 V3 is a fully equipped body armor system created for those who value functionality, comfort, and proper load distribution without additional adjustments.

This is not just a plate carrier and load-bearing system — it is a complete solution where all components are already selected, tested, and engineered to work as a single system. You do not need to spend time matching compatible components — everything is already integrated for maximum efficiency in real operational conditions.

The system was designed for military personnel, instructors, special units, and professionals operating in high-risk environments where equipment stability, comfort under load, and quick access to all gear components are critically important.

What Makes This System Special

Complete Integrated Solution

Plate carrier + load-bearing system + pouches + ballistic protection — everything is already integrated into one balanced system.

Ghost Gen5 V3 Load Distribution System

The 6-point suspension system evenly distributes weight between the shoulders and torso, reducing fatigue and back strain.

Ready for Immediate Use

The system does not require any additional upgrades or compatibility adjustments.

Dynamic Functionality

Thoughtful pouch placement provides fast access to equipment and stability during movement.

Balance of Protection and Mobility

Effective Class 1 ballistic protection is combined with high mobility and comfort during active movement.

Premium Materials

Cordura 1000D USA, SQUADRON Original Multicam USA, Tegris, Hypalon, Velcro Alfatex, 2M SPIDER hardware, TYTAN threads.

GHOST GEN5 V2 Plate Carrier

Next-Generation Anatomical Ergonomics

The plate carrier was designed for prolonged active use without excessive strain or discomfort.

Anatomical Shoulder Straps

Reduced width and updated geometry provide comfort, unrestricted movement, and improved stock placement.

Hypalon Shoulder Contact Zone

Special inserts provide stable weapon stock contact with the carrier and improve control.

Tegris Cummerbund

A rigid and stable construction that adapts to body movement without losing its shape.

Full Modularity

Compatible with additional protection modules, dampers, and different equipment configurations.

Ballistic Protection System

The system is equipped with:

• Elmon armor plates (Greece)
• side protection
• groin pouch protection
• lower back protection integrated into the ROLL medical pouch and Ghost Gen5 V3 load-bearing system

Elmon armor plates comply with the NIJ 0101.06 Level IV standard and provide maximum protection against armor-piercing threats, fragments, ricochets, and shrapnel.

Elmon Armor Plate Specifications:

• Material: Silicon Carbide (SiC)
• Weight: 2.8 kg (1 plate)
• Size: 25×30 cm (M)
• Thickness: 25 mm
• Shape: Shooter’s Cut
• Type: Stand Alone
• Certification: AITEX ISO 17025 (Spain)
• Manufacturer: Elmon, Greece

Ghost Gen5 V3 — Load Distribution System

Ghost Gen5 V3 is the key comfort element of the entire system.

Unlike traditional load-bearing systems where most of the weight is concentrated on the shoulders, Ghost Gen5 V3 uses a 6-point suspension system that distributes the load approximately 50/50 between the shoulders and torso.

System Advantages

• reduced fatigue during prolonged wear
• no pressure points
• high stability during active movement
• better equipment balance
• stable fit without sagging

As a result, the system works together with the body instead of overloading it.

Materials and Technologies

Main Materials:

• SQUADRON Original Multicam USA
• Cordura 1000D USA
• Tegris
• 3D Mesh ventilation system
• Hypalon

Laser-cut MOLLE System

• reduced system weight
• reinforced construction without unnecessary stitching
• flat and clean profile
• improved mobility
• flexible individual configuration

Comfort and Ergonomics

• 3D Mesh ventilation
• EVO inserts for shape stability
• 3D dampers with ventilation mesh
• anatomical shoulder straps with Hypalon
• Tegris cummerbund with elastic inserts
• cable management retainers
• evacuation drag handle

The system does not overheat, does not cause chafing, and remains comfortable even under full load.

Ghost Gen5 V3 Ballistic Protection

Ghost Gen5 V3 is equipped with an additional Class 1 ballistic package designed to protect the lower back area.

• Material: UHMWPE
• Damper: 8 mm
• Protection Class: Class 1 according to DSTU 8782:2018
• Laboratory testing: completed
• Certification: a stamped certificate copy is provided

GHOST GEN5 V2 Plate Carrier Configuration

• Plakard Performance GENII admin pouch platform
• Performance GENII groin pouch with protection module
• GHOST GEN5 radio pouch
• ROLL PRO enlarged medical pouch with lower back protection module
• Elite 2-compartment organizer
• GHOST GEN5 closed-type tourniquet pouch

Ghost Gen5 V3 Configuration

• AK/AR closed-type double magazine pouch Performance — 2 pcs
• Performance GEN II dump pouch — 1 pc
• Elite 2-compartment organizer — 1 pc
• Small 1-compartment organizer — 1 pc

Technical Specifications

• Load-bearing system weight: 500 g
• Load-bearing system weight with ballistic package: 1150 g
• Ballistic package weight: 650 g / 800 g
• Materials: Cordura 1000D USA, SQUADRON Original Multicam USA, 3D Mesh
• Hardware: 2M SPIDER, Fastex-UA
• Hook-and-loop: Velcro Alfatex
• Mounting system: Laser-cut MOLLE
• Color: Multicam USA
• Sizes: XS–3XL

Conclusion

GHOST GEN5 V2 + Ghost Gen5 V3 — a system built for real operational conditions.

This is the choice for those who:

• value comfort and proper load balance
• want a ready-to-use solution without compromises
• require stability and mobility under load
• choose professional-grade equipment

GHOST is not just equipment. It is a system that supports, unloads, and gives you control in every movement.

Tags: Комплекти споряджень Клас балістичного захисту Class 1 according to DSTU , Комплекти споряджень Тип Body armour + RPS , Комплекти споряджень Колір Multicam USA