GHOST GEN5 PRO V2+ + Ghost Gen5 V3+ is a fully equipped gear system created for those who value functionality, comfort, and proper load distribution without additional adjustments.

This is not just a set of components — it is a complete system where the plate carrier and load-bearing system work together as one unified platform. All components are already selected, tested, and optimized for real-world use. All you need to do is install the armor plates — and the system is ready to operate.

The system was developed around real operational demands: speed, control, stability in motion, and comfort even under full load.

What Makes This System Special

Complete Integrated Solution

Plate carrier + load-bearing system + pouches + ballistic protection — everything is already integrated into one complete platform.

Balanced Load Distribution

Thanks to the Ghost Gen5 V3+, the weight is not concentrated on the shoulders but evenly distributed across the body.

Ready for Immediate Use

No additional purchases or compatibility adjustments required.

Functionality in Dynamic Movement

Fast access to gear, stability in motion, and control in any conditions.

Balance Between Protection and Mobility

Class 2 ballistic protection without overloading the system.

Premium Materials

Cordura 1000D USA, Squadron 500/1000 USA, Tegris, Hypalon, Velcro Alfatex, 2M SPIDER hardware, TYTAN threads.

GHOST GEN5 PRO V2+ Plate Carrier

Next-Generation Anatomical Ergonomics

The plate carrier is designed for long-term active use without discomfort or overload.

Anatomical Shoulder Straps

Reduced width and updated geometry provide comfort, unrestricted movement, and improved weapon presentation.

Hypalon Weapon Contact Zone

Special inserts improve stock grip against the gear and provide better control.

Tegris Cummerbund

A rigid and stable construction that adapts to user movement without losing its shape.

Full Modularity

Compatible with additional protection, interchangeable shoulder straps, pads, and various cummerbund configurations.

Class 2 Ballistic Protection

The system is equipped with:

• side protection
• groin protection
• lower back protection integrated into the ROLL medical pouch and load-bearing system

Class 2 protection provides an increased level of safety while maintaining the balance between mobility, comfort, and the protective capabilities of the system.

Advantages:

• enhanced ballistic protection level
• protection against fragments and handgun ammunition
• maintained mobility during active movement
• optimal balance between protection, weight, and comfort

Ghost Gen5 V3+ Load Distribution System

Ghost Gen5 V3+ is the key comfort element of the entire system.

The system is designed to remove load from the shoulders and back while evenly distributing it across the entire body. As a result, the gear does not “pull” downward but remains stable on the body.

6-Point Suspension System

Weight distribution is approximately 50/50 between the shoulders and the body, providing:

• reduced fatigue during long-term wear
• elimination of pressure points
• high stability in movement
• better balance of the entire setup

As a result, the system sits on the body instead of overloading it.

Pouch Configuration (Plate Carrier)

• Plakard Performance GENII admin platform — 1 pc
• Performance GENII groin pouch with ballistic protection — 1 pc
• GHOST GEN5 radio pouch — 1 pc
• Enlarged ROLL PRO medical pouch with lower back protection — 1 pc
• Elite organizer with 2 compartments — 1 pc
• GHOST GEN5 closed-type tourniquet pouch — 1 pc

Ghost Gen5 V3+ Load-Bearing System Configuration

• Double AK/AR magazine pouches — 2 pcs
• Dump pouch — 1 pc
• Elite organizer with 2 compartments — 1 pc
• Small organizer with 1 compartment — 1 pc

Materials and Technologies

Main Materials:

• Squadron 500/1000 USA: Cordura + polyamide
• Cordura 1000D USA
• Tegris
• 3D ventilation mesh
• Hypalon

Advantages:

• resistance to intensive loads
• shape retention
• durability in demanding conditions
• stability under load

Laser-Cut MOLLE System

• reduced weight
• reinforced construction without unnecessary seams
• low-profile silhouette
• flexible adjustment
• precise gear fitment

Comfort and Ergonomics

• 3D Mesh ventilation
• EVO inserts for stability
• anatomical shoulder straps with Hypalon
• Tegris cummerbund with elastic inserts
• XS–3XL adjustment range
• cable management retainers and evacuation handle

The system does not overheat, does not cause friction, and remains comfortable even under full load.

Technical Specifications

• Load-bearing system weight: ~500 g
• Load-bearing system weight with ballistic protection: ~1150 g
• Ballistic package weight: 650–800 g
• Materials: Cordura 1000D USA, Squadron USA, 3D Mesh
• Hardware: 2M SPIDER, Fastex-UA
• Hook-and-loop: Velcro Alfatex
• Quick-release system: 2M SPIDER
• Color: Multicam USA
• Ventilation: 3D Mesh
• NIR coating: yes
• Sizes: XS–3XL

Conclusion

GHOST GEN5 PRO V2+ + Ghost Gen5 V3+ is a system that works together with you.

This is the choice for those who:

• want a ready-to-use solution without compromises
• value comfort and balance
• operate in dynamic and demanding conditions
• are not willing to tolerate overload

This is not just gear — it is a complete system that supports, unloads, and gives you control in every movement.

Tags: Комплекти споряджень Тип Plate carrier + RPS , Комплекти споряджень Колір Multicam USA